SECO-LARM SK-910R4Q Installation Manual download pdf

Installation Manual

ENFORCER

Introduction

The SK-910R4Q is a four-channel receiver which meets the growing demand for a multi-

channel receiver with multiple and independently controlled output modes. This RF receiver

is compatible with both code hopping and fixed-code transmitters (see page 4 of this

manual for a list of compatible transmitters). The receiver can be used to control a variety of

home automation devices, such as garage door openers, lights, motorized gates, lifts, or

other devices.

Models Available ( See SECO-LARM for details )

SK-910RQ ............... One-channel receiver, 315MHz

SK-910RLQ ............. Low-voltage, one-channel receiver, 315MHz

SK-910RVQ ............ Low-voltage, one-channel receiver,

Transistor ground output, 315MHz

SK-910R2Q ............. Two-channel receiver, 315MHz

SK-910R-4Q ........... One-channel receiver, 433.92MHz

SK-910RL-4Q .......... Low-voltage, one-channel receiver, 433.92MHz

SK-910R2-4Q ......... Two-channel receiver, 433.92MHz

SK-910RV-4Q ......... Low-voltage, one-channel receiver,

Transistor ground output, 433.92MHz

Installation Notes

1. Mount out of sight in a location where it is not surrounded by metal, and where it is not

exposed to the weather or to moisture. Metal will block the RF signal, resulting in a

reduced range.

2. For best range, pull the antenna wire as long and straight as possible. If the receiver

receives interference from local RF activity (e.g., an airport or military base), the

antenna wire can be folded. DO NOT CUT THE ANTENNA WIRE.

All models work on 11-24VAC/VDC, except for the low voltage versions.

This manual covers only four-channel receivers. For information on our one- and two-channel

receivers, please contact SECO-LARM.

●

Operates on 11-24VAC/VDC*

●

Up to 500 ft. range

Note: Model numbers that end with "Q" indicate RoHS compliant products.

9- 10

-910R4Q

SSK

9- 10

-910-910R4-4Q

-910R4-4Q

ouF r

Four-

Rh l RF

Channel RF R

c ee

eceivers

1 2 3 4

Summary of Contents

Page 1 - ENFORCER

Installation ManualENFORCER®IntroductionThe SK-910R4Q is a four-channel receiver which meets the growing demand for a multi-channel receiver with mult

Page 2 - Channel Memory Display

Code Learning a New Transmitter ButtonEach receiver channel can learn the codes of up to 15 different transmitter buttons on a first-in, first-out bas

Page 3 - Extended Range Antennas

MODE SWITCH#1 #2 #3 #4 #5123ONTIMERTimer Programming Switch}}}}Status LED}Channel 4Channel 3Channel 2Channel 1Power Input11~24VAC/VDCFig.

Page 4 - Compatible Transmitters

Typical Applications:Negative Output:11~24 VAC/VDC power input, 24VAC output driving a motor:11~24 VAC/VDC power input, 24VDC output driving a motor:1

Comments to this Manuals

No comments

SECO-LARM SK-910R4Q Installation Manual

Browse online or download Installation Manual for Security device components SECO-LARM SK-910R4Q. SECO-LARM SK-910R4Q User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Security device components SECO-LARM SK-910R4Q