SECO-LARM enforcer 300L Owner's Manual download pdf (Page 7)

ENFORCER 300C/L Owner's Manual

Page 7

B. Permanent delete — Your dealer can

program your alarm to delete the chirps.

NOTE — Either method deletes the arm,

disarm, pre-intrusion, zone bypass, and valet

chirps. However, it does not affect the flashing

parking lights.

CHIRP DELETE (Silent arm/disarm)

→

→

→

→

If you lose your transmitter, you can disarm

your alarm with the ignition key and VELT

button. While your alarm is either armed or

triggered, turn the ignition switch on, then

press and release the VELT button once. The

siren and the flashing lights stop, and the

alarm is disarmed. (Ask your dealer where

the VELT button is hidden.)

EMERGENCY DISARM

There are times, especially late at night, when

you may not want to hear the siren chirps.

There are two ways to delete the chirps:

A. One-time delete — Press button #2 any

time before you press button #1, and the

chirps will not sound when you press

button #1. For instance, if you press

button #2 before button #1 to arm or

disarm the alarm, the chirps will not

sound, but the parking lights will flash.

The chirps sound the next time you press

either button.

NOTE — If you use emergency

disarm, the alarm will arm passively

when you turn the ignition off and close the

doors. Next time you open a door, you will

have 10 seconds to turn the ignition on and

press the VELT button to disarm the alarm

before the siren sounds. This delay is

cancelled next time you arm or disarm your

alarm with the transmitter.

PATENTED STAY-SAFE DISARM

TM

Any time your alarm is triggered (the siren is

sounding and the parking lights are flashing),

press transmitter button #1 once to shut the

siren and flashing parking lights OFF while the

alarm stays completely armed.

NOTE — If a door was open when you

pressed transmitter button #1, the siren chirps

three times and the parking lights flash three

times to confirm it is not protected (see ZONE

BYPASS, page 5).

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments