SECO-LARM enforcer 300L Owner's Manual download pdf (Page 10)

SECO-LARM U.S.A., Inc.

ENFORCER 300C/L Owner's Manual

Page 10

SECOND CAR OPERATION

With this feature, your transmitters can control

alarms in two cars, with the functions of

If your alarm was triggered when you were

away, the siren will chirp two times and the

parking lights flash seven times when you

disarm your alarm.

TAMPER INDICATOR

Programmable features allow you to

customize your alarm. Your dealer can

program them when the alarm is installed.

 Passive/active arming — In passive

arming, the alarm arms itself when you

turn the ignition OFF and close the last

open door. In active arming, press

transmitter button #1 to arm the alarm.

 Manual/auto door locks in passive

arming mode — If your alarm is set for

passive arming, it can be set to lock the

doors automatically when it arms (don’t

forget to take your keys!). Otherwise, you

must press transmitter button #1 to lock

the doors.

Appendix 1 — PROGRAMMABLE FEATURES

 Ignition-controlled door locks — The

doors can be set to automatically lock/

unlock when ignition is turned ON/OFF.

 Permanent chirp delete — Permanently

enables or disables the siren’s chirps.

 Automatic Starter Disable (ASD™) —

Enables or disables ASD. With ASD, if

used, 10 minutes after you turn the

ignition off, the alarm disables your

engine's starter even if you forget to arm

your alarm!

DUAL-POWER PROTECTION (DPP™)

Helps keep your alarm powered even if a thief

cuts the alarm’s main power line.

These "memory" flashes automatically reset

when the ignition is turned on.

Whenever you disarm the alarm, your car's

domelights turn on for 30 seconds to help

DOMELIGHT SUPERVISION

you find your car at night and make sure no

one is hiding inside.

button #1 and button #2 switched in the

second car. (Optional — ask your dealer.)

(Optional — ask your dealer.)

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments