SECO-LARM enforcer 300L Owner's Manual download pdf (Page 9)

ENFORCER 300C/L Owner's Manual

Page 9

With this optional feature, your alarm can

lock the doors when it is armed and unlock

them when it is disarmed. They can be set to

lock and unlock any time transmitter button

#1 is pressed, or when the last door is closed

for passive arming. They lock automatically if

the alarm is triggered (exception — see

EMERGENCY CALL FOR HELP, page 5).

Ignition-controlled operation — The doors

automatically lock when you turn the ignition

on, and unlock when you turn the ignition off.

(Programmable — ask your dealer).

2-step unlock — When your alarm is armed,

pressing button #1 disarms the alarm and

unlocks the driver's door only. Pressing the

button again within one second unlocks the

passenger doors without arming the alarm.

(Optional — ask your dealer.)

Auto locking with passive arming — The

doors can be set to automatically lock after the

30-second exit delay is over and the alarm

arms. (Programmable — ask your dealer.)

POWER DOOR LOCKS

2nd & 3rd CHANNEL OUTPUTS

Your transmitter has two extra channels to

control optional accessories:

A. 2nd channel is commonly

used to "pop" the trunk. To

use, press transmitter

button #2 for 3 seconds,

either while the ignition is on

and any door is opened, or while the

ignition is off. (Note — If no doors are

hardwired to your alarm, 2nd channel will

not operate with the ignition on. Ask your

dealer for details.)

B. 3rd channel is commonly used for

optional remote car starting. Press button

#3 for as long as needed.

With this optional feature, while your alarm is

armed, your car will not start, even if a thief

has your keys.

Your alarm also has Automatic Starter Disable

(ASD). ASD works as follows:

• If your alarm is set for active arming, and

you do not arm it, ASD automatically

disables your engine's starter 10 minutes

after you disarmed the alarm or turned

the ignition switch off. The LED stays on

constantly to show ASD is engaged.

STARTER DISABLE

• Once ASD is engaged, you must press

transmitter button #1 to disengage ASD

before the engine will start.

• If you press transmitter button #1 to

disarm the alarm, but do not open the

door, ASD will re-engage 30 seconds later.

• If you press transmitter button #1 to

disarm the alarm, then open the door and

close the door without turning the ignition

on, ASD will re-engage 30 seconds later.

ASD is programmable — ask your dealer.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments