SECO-LARM enforcer 300L Owner's Manual download pdf (Page 11)

ENFORCER 300C/L Owner's Manual

Page 11

Appendix 3 — UNDERSTANDING THE LED

FLASHES

A. Arming indicator — Flashes quickly

during the 30-second rearm or passive

arming countdown.

B. Door open indicator — Off when a

hard-wired door is opened during the 30-

second rearm or passive arming

countdown.

C. Armed indicator — Flashes when the

alarm is armed.

D. Disarmed indicator — Off when the

alarm is disarmed.

E. One-time override of passive

arming — Steady on after VELT button is

pressed once.

F. RF reception indicator — On while any

transmitter button is being pressed.

G. Valet mode indicator — Flashes slowly

1.5 sec ON, 0.5 sec OFF.

H. Immoblizer mode indicator— Flashes

fast, 0.5 sec ON, 1.5 sec OFF.

Appendix 2 — UNDERSTANDING THE

SIREN CHIRPS AND LIGHT FLASHES

A. 1 chirp — Valet mode & learning mode is

successfully entered.

B. 1 chirp/flash:

• When transmitter button #1 is

pressed, the alarm is armed.

• When a door is closed, the alarm will

arm in 30 sec. (passive arming).

• 30 sec. after ignition switch is turned

OFF and all doors are closed (or 30

seconds after delayed domelights turn

OFF), the alarm is armed (passive

arming with switch sensing).

C. 2 chirps — Valet mode & learning mode

is successfully exited.

D. 2 chirps/flashes — When transmitter

button #1 is pressed, the alarm is

disarmed.

E. 3 chirps/flashes — When pressing

transmitter button #1 to arm the alarm,

indicates the alarm arms even though it is

not set properly (door not closed, or

broken switch, or domelight is still on, see

ZONE BYPASS on page 5).

F. 3 flashes — When pressing transmitter

button #1 then button #2, indicates

sensor's pre-intrusion function is bypassed.

G. 4 flashes — When transmitter button #1

is pressed, indicates alarm in valet.

H. 5 chirps/flashes — Pre-intrusion warns

potential thieves or vandals who trigger

the first stage of a dual-stage shock or

glass-break sensor that your car is

protected by an alarm.

I. 7 flashes — When the alarm is disarmed,

indicates the alarm was triggered while

you were away.

NOTE — The chirps for arm, disarm, pre-

intrusion, zone bypass, and valet can be

deleted (see CHIRP DELETE, page 7).

1 2 ... 6 7 8 9 10 11 12

Comments to this Manuals

No comments